Canon FAX-L2000, Reference Manual, Page: 107 / 212

Using the Energy Saver Mode 2-31
2
Gett
ing Started
6
Enter a number for the time (from 03 to 30 minutes) using the
numeric keys that you want the machine to remain idle before it
automatically enters the low energy sleep mode
➞
press [OK].
You can also press [
▼
] or [
▲
] to specify the time.
7
Press (Stop) to return to the Standby mode.
After the machine enters the Energy Saver mode, only the Energy Saver
indicator on the operation panel remains lit in green, while the LCD display is
turned off.
NOTE
• To enter the Energy Saver mode manually, press (Energy Saver).
Returning to the Full Power Mode
When the machine is in the Energy Saver mode, the Energy Saver indicator lights in green.
To restore the Full Power mode, press (Energy Saver). While the machine is powering up,
the message <PLEASE WAIT> is displayed for a few seconds.
The following actions automatically restores the Full Power mode:
• Receiving a document
• Printing an Activity Management report preset for printing
• Answering a call
• Dialing another machine to perform preset polling
You can awaken the machine from the low energy sleep mode by:
• Pressing (Energy Saver)
• Placing an original on the machine for sending or copying
4
1
7
5
2
8
6
3
9
0
OK
ENERGY SVR TIME
03MIN.
➞
TIMER SETTINGS
4.DAILY TIMER SET
PLEASE WAIT