Canon EOS C700 Instruction Manual Download | Manualshive

Page: 50 / 250

background image

Preparing Recording Media

50

IMPORTANT

• Observe the following precautions while a CFast card access indicator is illuminated in red. Failure to do so

may result in permanent data loss.
- Do not remove the power source or turn off the camera.
- Do not open the cover of the CFast card slot being accessed.

Inserting and Removing an SD Card

1 Wait until the SD card access indicator is off or is illuminated in

green.

2 Slide the SD card slot cover switch in the direction of the arrow.

• The SD card slot cover will open to the left.

3 Insert the SD card straight, with the label toward the back of

the camera, all the way into the SD card slot until it clicks.

• To remove the SD card, wait until the access indicator is off and

then push the SD card once to release it. When the SD card
springs out, pull it all the way out.

4 Close the SD card slot cover.

• Do not force the cover closed if the SD card is not correctly inserted.

SD card access indicator

If you set

[System Setup]

>

[LED]

>

[Media Access] to [Off], the card access indicators will not

illuminate.

IMPORTANT

• Observe the following precautions while the SD card access indicator is illuminated in red. Failure to do so may

result in permanent data loss.
- Do not remove the power source or turn off the camera.
- Do not remove the SD card.

• SD cards have front and back sides that are not interchangeable. Inserting an SD card facing the wrong

direction can cause a malfunction of the camera. Be sure to insert the SD card as described in step 3.

NOTES

• SD cards have a physical switch to prevent writing on the card so as to avoid the accidental erasure of the

card’s content. To write-protect the SD card, set the switch to the LOCK position.

SD card access indicator

SD card status

Red

Accessing the SD card.

Green

Simultaneous sub recording of XF-AVC Proxy clips is
activated and the SD card is ready for recording, or
playback of XF-AVC Proxy clips and photos is possible.

Off

An SD card is not inserted, the SD card is not being
accessed, or the SD card is write-protected with the LOCK
switch.

햳

햴

햵

SD card access indicator

«
...
48
49
50
51
52
...
»

Summary of Contents for EOS C700



























































































































































































































































Reviews:

No comments

Related manuals for EOS C700

Brand: Cambridge SoundWorks Pages: 20

Brand: Garmin Pages: 10

Brand: Pure Acoustics Pages: 1

Brand: Beta Three Pages: 11

Brand: VENCO Pages: 31

3D TRASAR Series

Brand: Nalco Pages: 243

DVT721 - Home Theater in a Box System

Brand: Zenith Pages: 25

Brand: Onkyo Pages: 4

NS-2024 - 2.0 SYSTEM

Brand: Insignia Pages: 24

Brand: Magnavox Pages: 12

Brand: Pyle Pages: 12

Brand: BENIFERRO Pages: 4

Brand: Scott Pages: 29

Brand: Steren Pages: 26

Brand: Samsung Pages: 69

Brand: Sven Pages: 16

Brand: Sven Pages: 31

Brand: RCA Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands