157
Audio Output
Audio Output
The camera can output audio from the SDI OUT terminals, MON. terminals, HDMI OUT teminal or
×
(headphone) terminal. The audio signal recorded with main recording clips recorded in the camera is 4-channel
linear PCM audio, 24 bit. The number of audio channels output and the audio bit depth depend on the terminal
used and other settings.
•
SDI OUT terminals:
During RAW video output: 2 channels*, 16 bit
During 2K output: 4 channels, 24 bit
•
MON. terminals:
4 channels, 24 bit
•
HDMI OUT terminal:
2 channels*, 16 bit
•
×
(headphone) terminal:
2 channels*
* You can select which two channels of the four audio channels recorded will be output from the terminal.
1 Open the audio channel selection screen/submenu for the desired terminal.
Setup screen:
[AUDIO]
>
[MONITOR] or
[AUDIO]
>
[OPTIONS]
>
[Audio Output]
>
[HDMI Channels] or [RAW (SDI)
Channels]
Monitoring menu:
[Audio Setup] (
¡
)
>
[Audio Output]
>
[Monitor Channels], [HDMI Channels] or
[RAW (SDI) Channels]
In playback mode:
[Audio Setup]
>
[Monitor Channels] or [HDMI Channels]
• [MONITOR]/[Monitor Channels]: audio from the
×
(headphone) terminal; [HDMI Channels]: audio output
from the HDMI OUT terminal; [RAW (SDI) Channels]: audio output from the SDI OUT terminals during RAW
video output.
• Alternatively, you can press an assignable button set to [Monitor Channels] (
A
127) to cycle among the
audio channel output options for the headphone terminal only.
2 Select the desired option and then press SET.
• The options show combinations of audio channels output from the left and right, respectively (L/R). For the
headphones output, options with a “+” sign (for example “CH1+2”) indicate a mix of two audio channels
output from the same side.
• The audio channels selected for output from the
×
(headphone) terminal will appear at the right of the
monitoring screen, under the audio level indicators (in shooting mode, only if
[Monitoring Setup]
>
[Custom Display 2]
>
[Audio Lvl Indicator] is set to [On]).
