Ad
ditional
Inf
ormation
97
E
Miscellaneous
• The video heads need cleaning
(p. 92).
• The video heads need cleaning
(p. 92).
• The TV/VIDEO selector on the TV
isn’t set to VIDEO (p. 25).
• The speaker has been turned off with
the selector dial (p. 21).
• Headphones are being used.
?
The playback picture is rough
(with mosaic-like noise).
?
There’s no picture on the TV
screen, even though the tape is
moving.
?
There’s no sound coming from the
speaker during playback.
Cause and/or what to do about it
• The remote sensor mode is set to
OFF
B
in the menu (p. 34).
• The remote sensor modes of the
wireless controller and the camera
itself are different (p. 34).
• The batteries are dead or not inserted.
• It is turned off (p. 35).
• Check the screen displays (p. 107).
• External interference may cause the
camera’s microprocessor to
malfunction temporarily. If random
letters appear in the display or if
normal operation is interrupted,
remove and then replace the power
source.
• If the camera still does not operate
properly, press the RESET button (on
the camera body behind the LCD
panel, p. 104) using the tip of a ball
point pen (or similar). Camera
functions return to their default
setting.
• Remove the cable and then reconnect
it or turn the power off and back on
again.
• This is not a malfunction.
Problem
?
The wireless controller doesn’t
work.
?
The tally lamp doesn’t flash.
?
The power indicator is flashing.
?
The camera malfunctions.
?
The DV cable is connected
correctly, but there’s nothing in
the display.
?
The camera becomes warm
during use.
