51
E
Using the Full
Rang
e of Features
Operating the multi-image screen
1. Select MULTI-S from the digital effects menu with the selector dial.
2. Select TR. SPEED (transition speed) or SPLIT TO from the digital
effects menu.
• Point the arrow at TR. SPEED and press the selector dial in.
• TR. SPEED settings appear: MANUAL, FAST, MOD (moderate), or SLOW.
• Point the arrow at your desired setting and press the selector dial in again.
• The display returns to the digital effects menu.
• Set SPLIT TO in the same way.
• SPLIT TO settings are: 4, 9 and 16.
3. Push the D.EFFECTS button.
• The digital effects menu disappears.
• MULTI-S flashes in the display.
4. Push the ON/OFF button.
• Manual: As you press the ON/OFF button, scenes will be captured one after
another the indicated number of times. If you push and hold the ON/OFF
button for more than a second, the last image captured will be erased.
• Automatic: The camera will capture the indicated number of images.
• Each time an image is captured, the number to the left of MULTI-S
increases.
• After all the images have been captured, push the ON/OFF button to cancel
the multi-image screen.
5. Push the start/stop button to begin recording.
• The multi-image screen is recorded to the tape.
Notes:
• You cannot use the multi-image screen with digital zoom or the 16:9 effect.
• Select D.EFFECT
|
to turn a previously selected digital effect off completely.
• You can operate the multi-image screen even after you have begun recording.
• While in photo mode, you cannot use the multi-image screen.
