Canon Elura Elura Instruction Manual Download

Page: 86 / 117

ditional

Inf

ormation

Notes on Using the Batteries

Charging and recording times

Battery pack

BP-608

BP-617 (option)

Time needed for

1 hr. 30 min.

2 hr. 30 min.

full recharge
Maximum

Using the viewfinder:

50 min.

1 hr. 50 min.

recording time

Using the LCD screen:

45 min.

1 hr. 35 min.

• These times vary — the safest policy is always to have two or three times as

many battery packs as you think you will need.

• You will get more recording time if you turn the camera off between shots,

instead of leaving it in record pause mode.

↓

100%

75%

50%

25%

↓

CHANGE THE BATTERY PACK

The indicator in the display shows you
approximately how much charge the
battery pack has left:

Notes:
• “CHANGE THE BATTERY PACK”

appears in the display for four
seconds when the power is
completely exhausted. The empty
battery mark then appears and starts
to flash. The power indicator light
also flashes.

• The indicator is not constant —

different levels will be shown when
you subject the battery pack and
camcorder to different conditions.

How much power is left?

• Recording time will be shorter than usual at low temperatures. You can use the

battery pack between 32° and 104°F (0° to 40°C), but it works best between
50° and 86°F (10° to 30°C).

• If the battery pack starts to give you much less recording time than usual, it has

reached the end of its life and must be replaced.

Summary of Contents for Elura Elura






















































































































Search results

Summary of Contents for Elura Elura

Reviews:

Related manuals for Elura Elura

Brands by name

Popular brands

Canon Elura Elura, Instruction Manual

Search results

Summary of Contents for Elura Elura

Reviews:

Related manuals for Elura Elura

Brands by name

Popular brands