Editing
76
E
REW
PLAY
FF
REC
PAUSE
SEARCH
SELECT
ZERO SET
MEMORY
AUDIO
DUB.
STOP
A/V
INSERT
PAUSE
SLOW
+ /
– /
×
2
Digital video equipment fitted with this terminal lets you edit, copy and transfer
data digitally, with virtually no generation loss in image and sound quality. The
DV terminal is for both line-in and line-out, since a single DV cable can handle
data in both directions.
• If another Canon digital video camcorder is connected, the Dubbing Function
can be used for digital-to-digital dubbing (i.e. with virtually no generation loss
in image quality).
• If a VCR is connected and an anomalous signal is sent from the VCR, the
images recorded on the tape may also be anomalous (although it may not appear
so on the TV image), or not recorded at all.
• You may not be able to dub tapes recorded with the copyright protective signal.
Use a Canon CV-150F DV cable to connect two digital devices together. When
you are recording from the ELURA, make sure you connect the cable to the
ELURA before connecting the other end of the cable to the recording device.
When you are recording to the ELURA, turn the POWER switch to VCR and
press the start/stop button on the body of the ELURA or the wireless controller’s
REC PAUSE button (“DV IN” appears in the display when you press “play” on
the playback device). Then press its pause button to start/pause recording.
If the cables are not connected properly, the camera displays the caution “CHECK
THE DV INPUT.”
• The image displayed by the camcorder that is being recorded to (for example on
its LCD screen, an attached TV, or in its viewfinder) may become distorted
during digital dubbing. The actual recording on the tape, however, is not
affected.
• If you press the start/stop button on the body of the ELURA or the wireless
controller’s REC PAUSE button with the DV cable unconnected, the camera
displays the caution “CHECK THE DV INPUT.” An anomalous image may also
flash onto the screen.
• Blanks between recordings on the playback tape are recorded as anomalous
images on the tape that is being recorded to.
• Do not turn the power off when operating either camcorder with the DV cable
connected.
DV terminal/connections
Dubbing with Digital Video Equipment
