Canon E4570, Online Manual

Page: 372 / 537

button:
By pressing this button once, "#" is entered. By pressing this button one more time, "P" is entered.
6. Press the Black button or the Color button. 6.
The printer starts scanning the document.
Important
• Color transmission is available only when the recipient's fax device supports color faxing. •
• Do not open the document cover until scanning is completed. •
7. Start sending. 7.
• If you load the document in the ADF: •
The printer scans the document automatically and starts sending the fax.
Note
• To cancel a fax transmission, press the Stop button. To cancel a fax transmission while it is in •
progress, press the Stop button, then follow the instructions on the LCD.
• If documents remain in the ADF after the Stop button is pressed while scanning is in progress, •
Original in ADF [OK]Eject the original is displayed on the LCD. By pressing the OK button,
the remaining documents are automatically ejected.
• If you load the document on the platen: •
After scanning the document, the confirmation screen asking you if you load the next document is
displayed.
To send the scanned document, press the OK button to start sending it.
To send two or more pages, follow the message to load the next page, and press the Color or
Black button. After scanning all pages, press the OK button to start sending.
Note
• To cancel sending the fax, press the Stop button. •
Note
• When your printer is connected to a PBX (Private Branch Exchange) system, refer to the operating •
instructions of the system for details on dialing the recipient's fax/telephone number.
• In case the printer was not able to send a fax, such as when the recipient's line was busy, it has the •
function to automatically redial the number after a specified interval. Automatic redialing is enabled by
default.
Automatic Redialing
• Unsent documents, such as those pending redial, are stored in the printer's memory. They are not •
stored in the case of a sending error.
Document Stored in Printer's Memory
372