Canon DS810 - SELPHY Color Inkjet Printer, Service Manual, Page: 42 / 44

3. SPECIFICATIONS
<Printer Specifications>
*
1
: When do printing the Canon standard pattern on 4" x 6" Photo Paper Plus Glossy in borderless printing, with the default settings in the
Windows XPdriver, using Windows XP Photo Printing Wizard. The print yield in the table above is an average value measured in
continuous printing, using the ink tank immediately after it is unsealed until the ink runs out. Ink yield may vary depending on text, photos
printed, application software, print mode, and type of paper used. Ink is consumed at power input and during printing to protect the print
head and keep print quality.
Type Serial color ink jet printer
Paper feeding method Auto sheet feed (ASF)
Resolution
4,800 x 1,200dpi (Max., when printing using a computer), 1200 x 600dpi (when performing Direct
Print)
Throughput
Camera Direct printing, PictBridge standard setting, Photo Paper Plus Glossy, borderless printing,
standard photo image, data of images equivalent to images of 5 million pixels taken with the Canon
compact digital camera (from start of printing to paper ejecting):
- Approx. 63 sec.
Printing direction Bidirectional
Print width Max. 101.6mm/4 inch (borderless printing)
Print yield*
1
BCI-16 Color, PP-101 4" x 6", borderless printing, INC photo image:
- Approx. 70 pages
Receive buffer 42KB
Interface
USB 2.0 Full Speed, Camera Direct port, IrDA V1.2 (supports only JPEG files), Bluetooth (optional
BU-20)
ASF stacking capacity Max. 20 sheets (PS-101: 1 sheet)
Detection functions
Access cover open, Presence of print head, Presence of ink tank, Remaining ink amount (dot count),
Paper presence, Paper end sensor, Waste ink amount, Internal temperature, Pick-up roller position,
Paper feed roller position, Carriage position, Supported camera direct printing device, Presence of
memory card, Supported paper size (in printing via the Print All button, or printing from a mobile
phone)
Acoustic noise
(Highest print quality)
Approx. 39dB (highest print quality settings)
Environmental
requirements
During
operation
Temperature 5C to 35C (41F to 95F)
Humidity 10%RH to 90%RH (no condensation)
Non operation Temperature 0C to 40C (32F to 104F)
Humidity 5%RH to 95%RH (no condensation)
Power supply
Power supply voltage,
frequency Power
consumption
Standby Power-off
AC 100 to 240 V, 50/60 Hz Approx. 11 W Approx. 1.5 W Approx. 0.7 W
External dimensions
Printer:
With the paper output tray and the viewer retracted: Approx. 220 (W) x 222 (D) x 99 (H) mm
With the paper output tray and the viewer extended: Approx. 220 (W) x 316 (D) x 146 (H) mm
Weight Approx. 1.9 kg, not including the print head and optional units
Related standards
(Printer, Adapter)
Electromagnetic radiance:
VCCI, FCC, IC, CE Mark, C-Tick, CCC (EMC), GOST-R, SASO
Electrical safety:
Electrical Appliance and Material Safety Law (DENAN), UL, c-UL, CB Report, CE Mark, GS,
GOST-R, AS, SASO, CCC, SPRING
Environmental regulations:
RoHS (EU), WEEE (EU), Chemical Substances Control Law, Battery Recycle Law, Law on
Promoting Green Purchasing, Container and Packaging Recycling Law, Energy Star, Blue Angel
Serial number location On the bottom shield plate of the printer
Remaining ink amount
detection
Available (automatic detection by dot count, enabled at default)
Print head alignment
- Not necessary at printer installation (when first purchased).
- Manual print head alignment is available in the Tool Box menu via the LCD monitor.
- Manual print head alignment is also available in the printer driver's Maintenance tab.