Canon DS810 - SELPHY Color Inkjet Printer, Service Manual, Page: 40 / 44

* Occurrence level:
A: The symptom is likely to occur frequently. (Caution required)
B: The symptom may occur under certain conditions, but likeliness is assumed very low in practical usage.
C: The symptom is unlikely to be recognized by the user, and no practical issues are assumed.
To the top
5 B Operability
The carriage
error due to the
mis-installed
print head
(5100) - When installing
the print head
(When replacing
the print head)
When the print
head lock lever is
not pressed
completely into
place at the print
head installation,
the print head lock
lever contacts with
the main cover,
due to its
incomplete
position. Which
causes the carriage
error, resulting in
the print head not
moving to the
center. When the print head cannot be
removed even after carrying out the
followings, repair is needed.
1) Disconnect the printer from a power
source with the printer powered on
when the carriage error is occurring.
2) Pull out the carriage and press the
print headlock lever in to fix it.
- Error (5100)
occurred.
- Cyclical
blinking of
the Power
LED and
the Alarm
LED (2
times)
6 - Specifications
The bottom of
the printer gets
hot. When
continuously
printing Per the
specifications.
In continuous
printing, the
bottom of the
printer becomes
hot, but
maintained within
the specified
range.
No specific solution.
The bottom of
the printer
gets hot.
<Part 2: 4. FAQ>