Canon DS810 - SELPHY Color Inkjet Printer, Service Manual, Page: 26 / 44

LG = 02 English
LG = 03 S. Chinese
LG = 04 German
LG = 05 French
LG = 06 Italian
LG = 07 Spanish
LG = 08 Dutch
LG = 09 Portuguese
LG = 0B Swedish
LG = 0E Russian
LG = 0F Czecho
LG = 10 Hungarian
LG = 11 Polish
(6) Service mode
<Service mode operation procedures>
1) With the printer power turned off, while pressing the Reset button, press and hold the Power button. (DO NOT release the buttons.)
(The Power LED lights.)
2) While holding the Power button, release the Reset button. (DO NOT release the Power button.)
3) While holding the Power button, press the Reset button 2 times, and then release both the Power and Reset buttons. (Each time the
Reset button is pressed, cycles of blinking of the Alarm LED and Power LED start and a mode becomes the menu selection.)
4) When the LED lights in green, press the Reset button the specified number of time (s) according to the function listed in the table
below. (Each time the Reset button is pressed, cycles of blinking of the Alarm LED and Power LED start.)
Function Procedures Remarks
Service test print See "Service mode operation procedures"
below. Set a sheet of 4" x 6"(101.6 mm x 152.4
mm)-sized paper.
For a print sample, see 3-4. Verification
Items, (1) Service test print.
EEPROM information print See "Service mode operation procedures"
below. Set a sheet of 4" x 6"(101.6 mm x 152.4
mm)-sized paper.
For a print sample, 3-4. Verification Items,
(2) EEPROM information print.
EEPROM initialization See "Service mode operation procedures"
below. The following item is NOT initialized:
- Waste ink counter
Waste ink counter reset See "Service mode operation procedures"
below. If the waste ink amount is 7% or more,
replace the ink absorbers.
Destination settings See "Service mode operation procedures"
below. The LCD monitor display language is set in
the user mode.
Print head deep cleaning See "Service mode operation procedures"
below. Cleaning of all colors at the same time.
Operation panel buttons /
LCD monitor display
checking See "Service mode operation procedures"
below. Checking on the operation panel buttons
operation and the LCD viewer display
Time(s) LED lit Function Remarks
0 times Power LED
Power off
Even when the print head is not installed, the carriage
returns and locks in the home position.
1 time Alarm LED
Service test print
See 3-4. Verification Items, (1) Service test print.
2 times Power LED
EEPROM information print
See 3-4. Verification Items, (2) EEPROM
information print.
3 times Alarm LED
EEPROM initialization The waste ink counter value is not reset.
4 times Power LED
Waste ink counter resetting
5 times Alarm LED Destination settings
Proceed to the following step 5), and follow the
Destination settings procedures .
6 times Power LED
Print head deep cleaning
11 times Alarm LED
Operation panel buttons / LCD
monitor display checking
After the following step 5), follow signal switching
procedures through the
operation panel buttons / LCD
monitor display checking .