Canon DIM-462 Instruction Manual Download

Page: 15 / 163

Adjusting the Grip Belt

• Adjust the length of the grip belt strap so that

you can operate the start/stop button and
zoom control effectively.

Attaching the Shoulder Strap

• For extra security and portability, attach the

shoulder strap before using the camcorder.

• Pass the ends through the strap mount and

adjust the length as shown.

• Be careful not to leave the viewfinder

exposed to bright sunlight as it may melt.
(The light is concentrated by the viewfinder
lens.)

Attaching the Large Eye Cup

Use the supplied Large Eye Cup when
recording in very bright surroundings or when
wearing glasses.

1. Detach the eye cup from the

camcorder.

2. Replace the eye cup with the Large

Eye Cup.

• You can attach it to the right or the left.

Preparations

Summary of Contents for DIM-462




































































































































































Search results

Summary of Contents for DIM-462

Reviews:

Related manuals for DIM-462

Brands by name

Popular brands

Canon DIM-462, Instruction Manual

Search results

Summary of Contents for DIM-462

Reviews:

Related manuals for DIM-462

Brands by name

Popular brands