Canon DIM-462 Instruction Manual Download

Page: 102 / 163

102

Editing

1. Find a point on your recorded cassette slightly before the section you wish to

copy and set it to playback pause mode.

2. Press the REC PAUSE button.

• S-video and audio IN/OUT terminals work as input terminals.
• The camera enters record pause mode.

3. Start playback on the other device or turn on the TV to see the desired

program while you monitor the picture.

4. Press the

(play/pause) button on the camcorder or the PAUSE

button on

the wireless controller.

• Recording starts.

5. When you get to the point where you wish to stop recording, press the stop

button or the pause button.

• Recording stops.

6. Stop playback on the other device.

Note:

• You can monitor the picture on the LCD screen/viewfinder.

Dubbing

Summary of Contents for DIM-462




































































































































































Search results

Summary of Contents for DIM-462

Reviews:

Related manuals for DIM-462

Brands by name

Popular brands

Canon DIM-462, Instruction Manual

Search results

Summary of Contents for DIM-462

Reviews:

Related manuals for DIM-462

Brands by name

Popular brands