Canon DADF-AV1, Service Manual

Page: 108 / 115

7. Close the DADF, and then open it again.
8. Press the White Plate upward as shown in the figure
below.
CAUTION:
If the White Plate is pressed downward, it is placed on
the Index Sheet, so be sure to press it upward.
9. With the DADF closed, check that the White Plate is
not placed on the Index Sheet as shown in the
figures.
CAUTION:
Be sure that there is no gap between the White Plate
and the Index Sheet. As a guide, it should be 0.3 mm
or less.
'$')
'$')
'$') '$')
White Plate
Index Sheet
Reader Unit
White Plate Index Sheet
Reader Unit
White Plate
Index Sheet
Reader Unit
White Plate
Index Sheet
Reader Unit
Adjusting the Reading
Position
1. Execute the following item in the service mode.
COPIER > FUNCTION > INSTALL > STRD-POS
2. Press [OK] or [Yes].
The scanner to start a scan; in several seconds, the
DADF will end auto adjustment of the read position.
6. Installation
102