Canon Color imageRUNNER C3200 Sending Manual Download Page 162

Page: 162 / 563

Frame Erase

4-15

Special Scanning F

eatures

Press [-] or [+] to set the frame erase width

➞

press [OK].

The selected mode is set, and the display returns to the Special Features screen.

NOTE

•

To enter values in millimeters, press [mm].

•

When entering values in millimeters, you can also use

(numeric keys), and

(Clear) to clear your entries.

•

You can change the values by pressing [-] or [+], even if you have entered the
values using

(numeric keys).

•

If you enter a value outside the setting range, a message prompting you to enter an
appropriate value appears on the screen.

•

The default setting is '3/4" (18 mm)'. The maximum width that you can set for the
Binding Erase mode is '13/16" (20 mm)'.

Press [Done]

➞

[OK].

The display returns to the Send Basic Features screen.

Press

(Start).

Follow the instructions that appear on the touch panel display

➞

press

(Start)

once for each original. When scanning is complete, press [Done].

Scanning starts.

The scanned data is sent to the specified destination when scanning is complete.

Summary of Contents for Color imageRUNNER C3200




















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Color imageRUNNER C3200

Reviews:

Related manuals for Color imageRUNNER C3200

Brands by name

Popular brands

Canon Color imageRUNNER C3200, Sending Manual

Search results

Summary of Contents for Color imageRUNNER C3200

Reviews:

Related manuals for Color imageRUNNER C3200

Brands by name

Popular brands