Canon Color image RUNNER LBP5360, User Manual

Page: 81 / 444

Turning the Printer ON and Checking the Printer Operation
2-38
Installing the Pr
inter
2
When the Printer Does Not Operate Properly
If the printer does not operate even after turning it ON or print Configuration Page
Print properly, the following causes are conceivable.
Symptom Cause Remedy
The printer cannot be turned
ON.
The power plug is unplugged
from the AC power outlet. Plug the power plug into the
AC power outlet.
There is a break in the power
cord.
If the printer is turned ON
after replacing the power
cord with the one that is of
the same type and is used
for other device, there is a
break in the power cord. In
this case, purchase a new
power cord and replace it
with the broken one.
The indicators on the control
panel do not come on.
The printer is not ON. Turn the printer ON.
The printer is in Power Save
Mode.
The printer will be ready to
print after you send print data
or press any key on the
control panel.
The printer does not operate.
The printer is offline.
Press [Online] to turn on the
Online indicator.
The interface cable is
disconnected.
Connect the interface cable
firmly to the interface
connectors on the computer
and printer unit.
A paper jam occurs each
time you print.
The amount of the paper
loaded in the paper cassette
or multi-purpose tray
exceeds the load limitation.
Reduce the amount of paper
to within the load limitation
and print again.
Paper is not loaded properly
in the paper cassette or
multi-purpose tray.
Load the paper properly and
print again.
Unusable paper is loaded in
the paper cassette or
multi-purpose tray. Replace the paper with one
that can be used and print
again.
There is still jammed paper
inside the printer. Remove any jammed paper
and print again.