Canon Color image RUNNER LBP5360, User Manual

Page: 355 / 444

8-58
T
roub
leshooting
8
When You Cannot Obtain Appropriate Printout Results
The overall print result is dark.
Cause 1 The setting for the toner density is not appropriate.
Remedy Adjust DENSITY:"color" (See p. 6-36) in the QUALITY MENU options in the
SETUP menu.
Cause 2 The printer is exposed to direct sunlight or strong light.
Remedy Move the printer to a place where it will not be exposed to direct sunlight or
strong light. Alternatively, move the strong light source away from the printer.
The print is uneven.
Cause 1 Paper is too moist or too dry.
Remedy Replace the paper with appropriate one and print again. (See "Paper
Requirements," on p. 4-2)
Cause 2 The toner cartridge has run out of toner, has deteriorated, or is damaged.
Remedy Replace the toner cartridge with a new one. (See "Replacing Toner Cartridges,"
on p. 7-2)
Front or back of the printed paper has smudge marks.
Cause The fixing roller is dirty.
Remedy Clean the fixing roller. (See "Cleaning the Fixing Roller," on p. 7-19)
A portion of a page is not printed.
Cause 1 The scale factor is incorrect.
Remedy 1 Clear the [Manual Scaling] check box in the printer driver. If the check box is
cleared, the scale factor will be set according to [Page Size] and [Output Size]
automatically.
In order to specify the setting for [Manual Scaling], display the [Page Setup]
sheet.
Remedy 2 Select the [Manual Scaling] check box in the printer driver, then specify an
appropriate scale factor according to the paper size to be used.
In order to specify the setting for [Manual Scaling], display the [Page Setup]
sheet.
Cause 2 The position of the paper is incorrect.
Remedy Load the paper properly. (See "Loading Paper in the Paper Cassette," on p.
4-19, "Loading Paper in the Multi-purpose Tray," on p. 4-36)