Windows 98 / 2000
The screen shots in this section are from Windows 98.
1.
Turn the computer on.
2.
When [Add New Hardware Wizard] appears,
click [Next].
3.
Confirm that [Search for the best driver for
your device. (Recommended)] is selected and
click [Next].
4.
Place the CanoScan Setup Utility CD-ROM in the
drive.
5.
Confirm that [CD-ROM drive] is selected, wait
for 10 seconds, and then click [Next].
If [Driver Not Found] appears, click [Back] and repeat
Step 5.
6.
When [CanoScan D1230U] or [CanoScan
D2400U] appears, click [Next].
The driver will begin to install.
If you are prompted to insert the Windows 98 CD-ROM,
follow the instructions below.
a.
Click [OK].
b.
Click [Browse].
c.
Select the CD-ROM drive and click [OK].
d.
Click [OK].
With Windows 2000 Professional, it may appear
massage box [The software you are about to install
does not contain a Microsoft digital signature.].
Continue installation clicking [Yes].
7.
Click [Finish].
D1230U/D2400U Quick Start Guide
4
