20
What To Do When an IRQ or I/O Port Address Conflict Arises
If you have installed cards other than the SCSI host adapter card, such as sound or network cards, conflicts
between cards may arise if IRQ or I/O port addresses are duplicated. In this case, use the Windows 95
[Device Manager] to change the IRQ or I/O port addresses of one of the cards.
CAUTION:
• The IRQ default factory setting for the SCSI host adapter card is [10]. This setting may be changed
to either [9], [11] or [12].
• The I/O port address default factory setting for the SCSI host adapter card is [140]. This setting
may be changed to [340].
• To change the IRQ or I/O port address settings of other cards, please refer to the instructions that
accompanied the card.
• After you have used the Device Manager to change these settings, be sure to restart Windows 95
from the [Start] menu.
