Canon 6352B001 User Manual Download Page 246

Page: 246 / 286

246

Using an Eye-Fi Card

•

Choosing [

] mode will interrupt the Eye-Fi connection. Although the Eye-Fi

connection will be restored after you choose another shooting mode or enter

Playback mode, the camera may transfer any movies made in [

] mode

again.

Checking Connection Information

Check the access point SSID used by the Eye-Fi card or the connection

status, as needed.

Press the <

> button, choose

[Eye-Fi Settings] on the [

] tab, and then

press the <

> button.

Choose [Connection info], and then press

the <

> button.

The connection information screen is

displayed.

Disabling Eye-Fi Transfer

Configure the setting as follows to disable Eye-Fi transfer by the card, if

necessary.

Choose [Disable] in [Eye-Fi trans.].

Press the <

> button, choose

[Eye-Fi Settings] on the [

] tab, and then

press the <

> button.

Choose [Eye-Fi trans.], and then choose

[Disable].

•

[Eye-Fi Settings] is not shown unless an Eye-Fi card is in the

camera with its write-protect tab in the unlocked position. For this

reason, you cannot change settings for an inserted Eye-Fi card if

the write-protect tab is in the locked position.

COP

Summary of Contents for 6352B001































































































































































































































































































Search results

Summary of Contents for 6352B001

Reviews:

Brands by name

Popular brands

Canon 6352B001, User Manual

Search results

Summary of Contents for 6352B001

Reviews:

Brands by name

Popular brands