Canon 6352B001 User Manual Download Page 208

Page: 208 / 286

208

Adjusting Basic Camera Functions

Resetting the Electronic Level

Restore the electronic level to its original state as follows. Note that this is

not possible unless you have calibrated the electronic level.

Choose [Electronic Level], and then press

the <

> button.

Choose [Reset], and then press the

> button.

Choose [OK], and then press the <

button.

Once the electronic level has been reset,

the menu screen is displayed again.

Setting Copyright Information to Record in Images

To record the author’s name and copyright details in images, set this

information beforehand as follows.

Access the setting screen.

Choose [Copyright Info], and then press

the <

> button.

Press the <

> buttons or turn the

> dial to choose [Enter Author’s

Name] or [Enter Copyright Details], and

then press the <

> button.

Enter a name.

Press the <

> buttons or

turn the <

> dial to choose a character,

and then press the <

> button to enter

it.

Up to 63 characters can be used.

Choose [ ] or [ ] and press the <

button to move the cursor.

To delete the previous character, either

press the <

> button or choose [ ] and

press the <

> button.

COP

Summary of Contents for 6352B001































































































































































































































































































Search results

Summary of Contents for 6352B001

Reviews:

Canon 6352B001, User Manual, Page: 208 / 286

Search results

Summary of Contents for 6352B001

Reviews: