Canon 5060F - Document Scanner Instructions Manual Download

Page: 80 / 92

Wipe the rollers with a firmly wrung cloth moistened with water or

mild detergent while rotating the rollers.

Rollers are located at the positions indicated in the figure below.

NOTE

●

Remove the intermediate unit before wiping the rollers in the intermediate
unit. (See “Removing the Intermediate Unit” P. 66)

●

The drive rollers indicated in the figure below cannot be rotated by hand. If
dirty drive rollers are causing dirt to appear on the scanned document,
contact a Canon service department.

Open the feed unit.

Backup

ng Option

ew File

Space

ount Only

Manual

Auto

Semi-Auto

Rollers

Intermediate unit

Drive rollers

Daily Cleaning

Summary of Contents for 5060F - Document Scanner





























































































Search results

Summary of Contents for 5060F - Document Scanner

Reviews:

Related manuals for 5060F - Document Scanner

Brands by name

Popular brands

Canon 5060F - Document Scanner, Instructions Manual

Search results

Summary of Contents for 5060F - Document Scanner

Reviews:

Related manuals for 5060F - Document Scanner

Brands by name

Popular brands