![background image](http://html.mh-extra.com/html/canon/4k600stz/4k600stz_user-manual_62436175.webp)
175
Using the Projector on a Network
Ad
va
nc
ed
G
uid
e
Using
the
Pr
oje
ctor
on a Networ
k
* When the interval is set to 0 seconds, repeated attempts to send mail are made
(as set in [Mail resend times]) without pausing between attempts.
Mail Authentication Settings
From [Mail auth] under [Mail] in the settings screen, you can configure the settings
for authentication of mail that is sent when an error occurs. For the setting
procedure, refer to “Network Setting” (
IPv6 SMTP server IP
address
Enter the SMTP server IP address
(IPv6) in 1-byte numbers.
<Blank>
IPv6 SMTP server port
number
Enter the SMTP server port number
(IPv6) in 1-byte numbers (1 - 65535).
25
Mail resend interval*
Enter the interval for resending mail
when an error occurred (unit: seconds)
within the range of 0 - 59 seconds using
1-byte numbers.
10
Mail resend times
Enter the number of times to resend
mail when an error occurred within the
range of 0 - 255 using 1-byte numbers.
3
Item
Explanation
Factory default setting
Mail authentication
Select the mail authentication method.
If OFF is selected, the other mail
authentication settings cannot be
changed.
OFF
User name
Enter the user name to use for mail
authentication in 1-byte alphanumeric
characters and symbols (1 - 63
characters).
<Blank>
Password
Enter the password for mail
authentication in 1-byte alphanumeric
characters and symbols (1 - 63
characters).
<Blank>
Confirm password
For confirmation, enter the same
password as you entered in
[Password].
<Blank>
IPv4 POP3 server IP
address
Enter the POP3 server IP address
(IPv4) in 1-byte numbers.
0.0.0.0
IPv4 POP3 server port
number
Enter the POP3 server port number
(IPv4) in 1-byte numbers (1 - 65535).
110
IPv6 POP3 server IP
address
Enter the POP3 server IP address
(IPv6) in 1-byte numbers.
<Blank>
IPv6 POP3 server port
number
Enter the POP3 server port number
(IPv6) in 1-byte numbers (1 - 65535).
110
POP before SMTP
response time
Enter the SMTP authentication timeout
period after POP3 authentication (unit:
milliseconds) using 1-byte numbers
(0 - 9999 milliseconds).
300
Item
Explanation
Factory default setting
Summary of Contents for 4K600STZ
Page 17: ...17 Safety Instructions Safety Instructions ...
Page 74: ...74 ...