manualshive.com logo in svg

Canon 4K600STZ, User Manual

Share
Download
Canon 4K600STZ User Manual Download Page 23

23

Before Installation

Before Inst

allat

ion

■

When Using Mounted on the Ceiling

■

Installation to Project Up, Down, or at an Angle

When using the projector mounted on 
the ceiling or installed in a high location, 
clean around the air intake and exhaust 
vents periodically. Dust that 
accumulates in intake or exhaust vents 
may impair ventilation, raising the 
temperature inside and posing a risk of 
damage or fire. Use a vacuum cleaner or 
similar means to remove dust from the 
intake vent and exhaust vent.

• Projection is possible upward, downward, or in a variety of 

directions, but do not block the air intake and exhaust vents. In 
particular, always ensure a minimum clearance of 2 cm (0.8") from 
the air intake vent on the bottom of the projector.

• There are no options for installing the projector other than the 

ceiling attachment.

• When mounting the projector on the ceiling, it is more convenient 

to install the projector right-side up, with the adjustable feet facing 
down.

Summary of Contents for 4K600STZ


























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands