Using the Projector on a Network
178
Setting Up a Controller Manufactured by Crestron Electronics
[Crestron Controller]
The [Crestron e-Control] screen will open. For details on the Crestron Controller,
visit the Crestron website.
http://www.crestron.com/
Setting Errors
When a setting-related error occurs, the error name is displayed on the screen, and
a “ ” mark is displayed next to the input field which caused the error.
The error meanings are as shown below.
Item
Explanation
Factory default setting
PJLink
Turn the PJLink function on or off. If
OFF is selected, the other settings in
this screen cannot be configured.
ON
PJLink authentication
Select whether to turn the PJLink
authentication function on or off. If OFF
is selected, it is not possible to change
the following items.
[Password]
[Confirm password]
ON
Password
Enter the PJLink authentication
password in 1-byte alphanumeric
characters (1 - 32 characters).
system
Confirm password
For confirmation, enter the same
password that you entered in
[Password].
system
Error
Meaning
Input error
A setting outside the valid range was set on the
settings screen.
Password setting error
The set password and confirmation password did
not match.
Invalid SMTP
The SMTP server IP address has not been set.
Summary of Contents for 4K600STZ
Page 17: ...17 Safety Instructions Safety Instructions ...
Page 74: ...74 ...
