Canon 4462B005 Instruction Manual Download Page 235

Page: 235 / 260

235

Digital Camera Model DS126271 Systems

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference,

and (2) this device must accept any interference received, including

interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for

class B digital devices, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the following

measures:

— Reorient or relocate the receiving antenna.

— Increase the separation between the equipment and receiver.

— Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

— Consult the dealer or an experienced radio/TV technician for help.

The cable with the ferrite core provided with the digital camera must be used

with this equipment in order to comply with Class B limits in Subpart B of Part

15 of the FCC rules.
Do not make any changes or modifications to the equipment unless otherwise

specified in the manual. If such changes or modifications should be made, you

could be required to stop operation of the equipment.
Canon U.S.A. Inc.

One Canon Plaza, Lake Success, NY 11042, U.S.A.

Tel No. (516)328-5600

This Class B digital apparatus complies with Canadian ICES-003.

When connecting to and using a household power outlet, use only AC
Adapter Kit ACK-E8 (rated input: 100-240 V AC 50/60 Hz, rated output:
7.4 V DC). Using anything else can cause fire, overheating, or
electrical shock.

COP

Summary of Contents for 4462B005





































































































































































































































































Search results

Summary of Contents for 4462B005

Reviews:

Related manuals for 4462B005

Brands by name

Popular brands

Canon 4462B005, Instruction Manual

Search results

Summary of Contents for 4462B005

Reviews:

Related manuals for 4462B005

Brands by name

Popular brands