Canon 4462B005 Instruction Manual Download

Page: 177 / 260

177

Preparing to Print

Playback the image.

Press the <

> button.

The image will appear, and the <

icon will appear on the upper left to
indicate that the camera is connected
to a printer.

PictBridge

Movies cannot be printed.

The camera cannot be used with printers compatible only with CP Direct
or Bubble Jet Direct.

Do not use any interface cable other than the one provided.

If there is a long beeping sound in step 5, it indicates a problem with the
printer. To find out what’s wrong, do the following:

1. Press the <

> button to playback the image.

2. Press <

3. On the print setting screen, select [

Print

The error message will be displayed on the LCD monitor (p.184).

If you use a battery pack to power the camera, make sure it is fully
charged. With a fully-charged battery, printing up to approx. 4 hours is
possible.

Before disconnecting the cable, first turn off the camera and printer. Hold
the plug (not the cord) to pull out the cable.

For direct printing, using AC Adapter Kit ACK-E8 (sold separately) to
power the camera is recommended.

COP

Summary of Contents for 4462B005





































































































































































































































































Search results

Summary of Contents for 4462B005

Reviews:

Related manuals for 4462B005

Brands by name

Popular brands

Canon 4462B005, Instruction Manual

Search results

Summary of Contents for 4462B005

Reviews:

Related manuals for 4462B005

Brands by name

Popular brands