Canon 4462B005 Instruction Manual Download Page 124

Page: 124 / 260

124

Connecting the camera to a TV set is recommended to playback
movies (p.167, 169).

Set the Mode Dial to <

The reflex mirror will make a sound,
then the image will appear on the
LCD monitor.

Focus the subject.

Before shooting a movie, autofocus
or manual focus (p.113-120).

When you press the shutter button
halfway, the camera will focus with
the current AF mode.

Shooting the movie.

Press the <

> button to start

shooting a movie. To stop movie
shooting, press <

> again.

While the movie is being shot, the
“

” mark will be displayed on the

upper right of the screen.

Shooting Movies

Autoexposure Shooting

During movie shooting, do not point the lens toward the sun. The sun’s
heat can damage the camera’s internal components.

Cautions for movie shooting are on pages 135 and 136.

If necessary, also read the Live View shooting cautions on pages
121 and 122.

COP

Summary of Contents for 4462B005





































































































































































































































































Search results

Summary of Contents for 4462B005

Reviews:

Related manuals for 4462B005

Brands by name

Popular brands

Canon 4462B005, Instruction Manual

Search results

Summary of Contents for 4462B005

Reviews:

Related manuals for 4462B005

Brands by name

Popular brands