26
When printing on special paper, or if printing is not improved after
Auto(Advanced)
, try
Manual
.
•
(
→
"Manual Adjustment to Straighten Lines and Colors (Head Posi. Adj.)," User Manual)
Use
Auto(Standard)
if you have switched to another type of paper or if you want the boundaries between colors to
appear as clear as possible.
•
Use
Auto(Advanced)
to
fi
ne-tune the space between nozzles or colors if you have switched the printhead or if
clearer printing is required. We recommend
Auto(Advanced)
for printing at the highest level of quality.
•
We recommend using the type of paper you use most often for adjustment.
•
This function is not available with CAD Tracing Paper
, CAD Translucent Matte Film
, or CAD Clear Film
. If
adjustment is not possible as expected using highly transparent
fi
lm or similar media, try another type of paper, or
try
Manual
adjustment. (
→
"Manual Adjustment to Straighten Lines and Colors (Head Posi. Adj.)," User Manual)
•
Always make sure the loaded paper matches the type of paper speci
fi
ed on the printer. Adjustment cannot be
completed correctly unless the loaded paper matches the settings.
•
If printed vertical lines are warped or colors are out of alignment, execute
Head Posi. Adj.
to adjust the Printhead
alignment.
Use
Auto(Standard)
or
Auto(Advanced)
to have the printer print and read a test pattern for automatic printhead
adjustment.
Paper to
Prepare
If Vertical Lines are Warped or Colors
are Misaligned
This section describes how to perform automatic adjustment of the printhead to
straighten lines and colors.
Rolls
•
An unused roll at least 10 inches wide
Sheets
•
Auto(Standard)
: One sheet of unused paper of at least A4/Letter size
Auto(Advanced)
: Five sheets of unused paper of at least A4/Letter size (or one sheet when
using A2 or larger)
There are two modes for automatic Printhead
adjustment:
Auto(Standard)
and
Auto(Advanced)
.
Auto(Standard)
will
fi
x most slight image distortion or color misalignment, but if not, try
Auto(Advanced)
.
Summary of Contents for 3433B010
Page 51: ......
