Canon 3114C008 Online Manual Download Page 450

Page: 450 / 480

1304

Cause

Paper is jammed when performing automatic duplex printing.

What to Do

Remove jammed paper.

• If the paper is jammed at the paper output slot:

1300

• If the paper is jammed inside the printer:

Paper Is Jammed inside Printer

• If the paper is jammed at the feed slot of the cassette:

After storing the output tray extension and the paper output tray, pull out the cassette and
remove the jammed paper slowly with both hands.

Important

• When checking the feed slot of the cassette or removing the jammed paper, do not turn the

printer upside down or tilt it. The ink may leak out.

• If none of the above is applied, see

Removing Jammed Paper from Rear Side

to open the rear

cover and to remove the paper.

Load paper properly.

Loading Paper in the Cassette
Loading Paper in the Rear Tray

Press printer's

button.

450

Summary of Contents for 3114C008

































































































































































































































































































































































































































































































Search results

Summary of Contents for 3114C008

Reviews:

Canon 3114C008, Online Manual, Page: 450 / 480

Search results

Summary of Contents for 3114C008

Reviews: