manualshive.com logo in svg

Canon 3114C008, Online Manual, Page: 415 / 480

Share
Download
Canon 3114C008 Online Manual Download Page 415

Cannot Send a Fax

Check1

 Is power turned on?

• You cannot send faxes if the power is turned off. Press the 

ON

 button to turn the power on.

• If you unplugged the power cord without turning off the power (the 

ON

 lamp is lit), reconnecting it turns on

the power automatically.

• If you unplugged the power cord after pressing the 

ON

 button to turn off the power (the 

ON

 lamp is off),

reconnect it, and then press the 

ON

 button to turn on the power.

• If the power was turned off due to power failure, etc., the power is automatically turned on when the power

failure is resolved.

Important

• Confirm that the 

ON

 lamp is off before unplugging the power cord, and then unplug the power cord.

If a power failure occurs or you unplug the power cord, all faxes stored in the printer's memory are deleted.

For details on how to unplug the power cord, see 

Unplugging the Printer

.

Note

• If the faxes stored in the printer's memory are deleted by a power failure or unplugging the power cord, the

list of the faxes deleted from the printer's memory (MEMORY CLEAR REPORT) will be printed after turning
the printer on.

Summary of Reports and Lists

Check2

 Is document being sent from memory or the fax being received into memory?

When the message for the transmission/reception is displayed on the Fax standby screen, a fax is being sent
from/received into printer's memory. Wait until the transmission/reception is complete.

Check3

 Is printer's memory full?

Delete contents in memory, and then send a fax again.

Document Stored in Printer's Memory

Check4

 Is telephone line type set correctly?

Check the telephone line type setting and change it as necessary.

Setting Telephone Line Type

Check5

 Is 

Hook setting

 set to 

Disable

?

When you send a fax manually, dial the number with 

Enable

 selected for 

Hook setting

 in 

Security control

under 

Fax settings

, or dial the number using the telephone connected to the printer.

415

Summary of Contents for 3114C008

































































































































































































































































































































































































































































































Reviews:

No comments