Canon 3114C008 Online Manual Download Page 157

Page: 157 / 480

Front View

A: Paper Support

Extend to load paper in the rear tray.

B: Rear Tray Cover

Open to load paper in the rear tray.

C: Paper Guides

Align with both sides of the paper stack.

D: Feed Slot Cover

Prevents anything from falling into the feed slot.

Open it to slide the paper guides, and close it before printing.

E: Rear Tray

Load paper here. Two or more sheets of the same size and type of paper can be loaded at the same
time, and fed automatically one sheet at a time.

Loading Paper in the Rear Tray
Loading Envelopes in Rear Tray

F: Cassette

Load A4, B5, A5, or Letter-sized plain paper into the cassette, and insert it into the printer.

Loading Paper in the Cassette

G: Paper Guides

Align with right/left/front sides of the paper stack.

H: Paper Output Tray

Printed paper is ejected. Pull out it before printing.

I: Output Tray Extension

Open to support ejected paper.

157

Summary of Contents for 3114C008

































































































































































































































































































































































































































































































Search results

Summary of Contents for 3114C008

Reviews:

Canon 3114C008, Online Manual, Page: 157 / 480

Search results

Summary of Contents for 3114C008

Reviews: