manualshive.com logo in svg

Canon 3114C008, Online Manual, Page: 372 / 480

Share
Download
Canon 3114C008 Online Manual Download Page 372

Check3

 If using WPA/WPA2 key or a password, make sure encryption key for

computer, network device, and printer matches key set for wireless router.

The length or format of the Wi-Fi password and authentication method must be identical among the wireless
router, the printer, and your computer.

For details, see 

Setting an Encryption Key

.

With Encryption On, Cannot Communicate with Printer After

Changing Encryption Type at Wireless Router

If you change the encryption type for the printer and it subsequently cannot communicate with the
computer, make sure the encryption type for the computer and the wireless router matches the type set
for the printer.

Cannot Communicate with Printer After Enabling MAC/IP Address Filtering or Encryption Key on

Wireless Router

372

Summary of Contents for 3114C008

































































































































































































































































































































































































































































































Reviews:

No comments