Canon 3114C008 Online Manual Download Page 105

Page: 105 / 480

Checking Ink Level

Check ink level with the ink tank indicator on the front of the printer.

When ink reaches the upper limit line (A), ink is full.

When ink is near the lower limit line (B), ink is running low. Refill the ink tank.

Note

• To check the remaining ink level, visually inspect the remaining ink in the ink tank.

Important

• If printing is continued when the remaining ink level is below the lower limit line, the printer may

consume a certain amount of ink to return to printable status and may also become damaged.

Note

• When you refill the ink tank, refill the ink tank until ink reaches the upper limit line (A). If ink does not

reach the upper limit line, the remaining ink level is not detected correctly.

• If a remaining ink error occurs, the error message appears on the LCD.

When Error Occurred

• To ensure you receive premium print quality and to help protect your print head, a certain amount of ink

remains in the ink tank when the printer indicates to refill the ink tank. The estimated page yields of the
ink bottle do not include this amount.

• Ink flows from the ink tanks to the inside of the printer. Ink may seem to run out fast due to this

procedure when you start using the printer or after transporting it.

105

Summary of Contents for 3114C008

































































































































































































































































































































































































































































































Search results

Summary of Contents for 3114C008

Reviews:

Canon 3114C008, Online Manual, Page: 105 / 480

Search results

Summary of Contents for 3114C008

Reviews: