Canon 2566B001 User Manual Download

Page: 131 / 244

129

Playback/

rasin

Movies,

images, and images recorded in

cannot be trimmed.

Some images shot with another camera cannot be trimmed.

The aspect ratio for images which can be trimmed will be
fixed to 4:3 (or 3:4 if the image is vertically oriented).

The recording pixels of a trimmed image will be less than the
image before trimming.

Viewing Movies

Display a movie.

Use the

button to select a

movie.

Press the

button.

• Images with a

icon are movies.

Play the movie.

Use the

button to select

Press the

button.

• The movie will pause if you press

the

FUNC./SET

button during

playback. It will resume when you
press the button again.

• When playback ends, the movie

stops at the last frame displayed.
Press the

FUNC./SET

button to

display the movie control panel.

• You can switch between showing/hiding the playback progress

bar by pressing the

DISP.

button while playing a movie.

• If playback was halted partway through in the prior viewing

session, playback will resume from the last frame displayed.

Volume Level
(Adjust it with the

button)

Movie Control Panel

Playback Progress Bar

Time movie was shot

Summary of Contents for 2566B001





















































































































































































































































Search results

Summary of Contents for 2566B001

Reviews:

Related manuals for 2566B001

Brands by name

Popular brands

Canon 2566B001, User Manual

Search results

Summary of Contents for 2566B001

Reviews:

Related manuals for 2566B001

Brands by name

Popular brands