Canon 2162B002, User Manual

Page: 68 / 807

Control Panel
Interface Setup
Setting Item Description, Instructions
EOP Timer Specify the timeout period before cancellation of
print jobs that cannot be received by the printer.
IP Mode Choose whether the printer IP address is
congured automatically or a static IP address
is entered manually.
DHCP
BOOTP
Protocol
RARP
Specify the protocol used to congure the IP
address automatically.
IP Address
Subnet Mask
TCP/IP
IP Setting
Default G/W
Specify the printer network information when
using a static IP address.
Enter the IP address assigned to the printer, as
well as the network subnet mask and default
gateway.
NetWare Specify the NetWare protocol. To apply your
changes, choose
Register Setting .
Frame Type Specify the frame type to use.
NetWare
Print Service Choose the print service.
AppleTalk Specify whether to use the AppleTalk protocol.
To apply your changes, choose
Register
Setting .
Auto Detect Specify the communication method. To apply
your changes, choose
Register Setting .
Choose On for automatic conguration of the
LAN communication protocol. Choose Off
to use settings values of Comm.Mode and
Ethernet Type .
Comm.Mode Choose the LAN communication method.
Ethernet Type Choose the LAN transfer rate.
Spanning Tree Choose whether spanning-tree packets are
supported over the LAN.
Ethernet Driver
MAC Address Displays the MAC address.
Ext. Interface Choose the expansion interface.
Return Defaults Execute? is displayed if you press the ▼
button. Choose OK to restore the network
settings to the default values.
54 Printer parts