Canon 0967B001 - XL H1 Camcorder Instruction Manual Download

Page: 99 / 161

Playback

(Frame Advance)

Plays back frame-by-frame. Repeatedly press the button on the

wireless controller during playback

pause. Hold the button pressed down to enter the continuous frame advance playback.

(Slow Forward)

Plays back at about 1/3 normal speed. Press the SLOW

button on the wireless controller during normal or

reverse playback. Press the

(play) button to return to normal playback.

(Playback Pause)

To pause playback, press the

button on the camcorder or the PAUSE

button on the wireless controller

during normal playback.

(Rewind Playback) /

(Fast Forward Playback)

Plays back the tape at 9.5 times normal speed (forward or reverse). Press down and hold the

button on the camcorder or the REW

or FF

button on the wireless controller during normal

playback, rewind or fast forward to enter the fast playback at 8x the normal playback speed.

(Frame Reverse) /

(Frame Advance)

Plays back frame-by-frame. Press the

button on the wireless controller repeatedly during

playback pause. Hold the button pressed down to enter the continuous frame advance/reverse playback.

(Slow Reverse) /

(Slow Forward)

Plays back at about 1/3 normal speed. Press the SLOW

button on the wireless controller during normal or

reverse playback. Press the

(play) button to return to normal playback.

(Reverse Playback)

Press the

button on the wireless controller during normal playback. Press the

(play) button to return

to normal playback.

x2 (Reverse x2 Playback) / 2x

(Forward x2 Playback)

Plays back at 2 times normal speed. Press the

button on the wireless controller during normal or reverse

playback. Press the

(play) button to return to normal playback.

The sound will be muted during special playback.

The picture may become distorted during some special playback modes.

The camcorder stops the tape automatically after 3 minutes in playback pause mode to protect the
tape and video heads.

In fast forward playback, rewind playback and reverse playback of a tape recorded in HDV mode,
the picture may be distorted.

The picture may be slightly distorted at the switch point between recordings in HDV and DV
standards on the tape.

Summary of Contents for 0967B001 - XL H1 Camcorder


































































































































































Search results

Summary of Contents for 0967B001 - XL H1 Camcorder

Reviews:

Related manuals for 0967B001 - XL H1 Camcorder

Brands by name

Popular brands

Canon 0967B001 - XL H1 Camcorder, Instruction Manual

Search results

Summary of Contents for 0967B001 - XL H1 Camcorder

Reviews:

Related manuals for 0967B001 - XL H1 Camcorder

Brands by name

Popular brands