Canon 0967B001 - XL H1 Camcorder Instruction Manual Download

Page: 16 / 161

Preparations

Preparing the Power Supply

Charging the Battery Pack

Disconnect the DC coupler from the power adapter before charging. Remove the terminal cover of the
battery pack.

1. Connect the power cord to the adapter.

2. Plug the power cord into a power outlet.

3. Attach the battery pack to the adapter.

• Press lightly and slide the battery pack in the

direction of the arrow until it clicks.

• The charge indicator starts flashing. The indicator

will stay on when the charging is complete.

4. When the charging is complete, remove the

battery pack from the adapter.

5. Unplug the power cord from the power

outlet and disconnect it from the adapter.

Attaching the Battery Pack

1. Turn the POWER dial to OFF.

2. Attach the battery pack to the camcorder.

Press lightly and slide the battery pack up, in the
direction of the arrow until it clicks.

3. Remove the battery pack after use.

Holding the BATT.RELEASE button pressed down,
slide the battery pack down to remove it.

Charge indicator

Summary of Contents for 0967B001 - XL H1 Camcorder


































































































































































Search results

Summary of Contents for 0967B001 - XL H1 Camcorder

Reviews:

Related manuals for 0967B001 - XL H1 Camcorder

Brands by name

Popular brands

Canon 0967B001 - XL H1 Camcorder, Instruction Manual

Search results

Summary of Contents for 0967B001 - XL H1 Camcorder

Reviews:

Related manuals for 0967B001 - XL H1 Camcorder

Brands by name

Popular brands