Canon 0967B001 - XL H1 Camcorder Instruction Manual Download Page 68

Page: 68 / 161

Image Stabilizer
(Lenses Equipped with Image Stabilizer)

You can select to activate or turn off the image stabilizer depending on the recording conditions.

Move the STABILIZER ON/OFF switch to OFF.

The image stabilizer cannot be turned off in the

Easy Recording mode.

We recommend turning off the image stabilizer when mounting the camcorder on a tripod.

The image stabilizer is designed to compensate for a normal degree of camcorder shake.

The image stabilizer may not be effective when attaching an optional Extender.

: The image stabilizer will be activated while half-pressing the PHOTO button to lock

the autofocus.

STABILIZER ON/OFF switch

Summary of Contents for 0967B001 - XL H1 Camcorder


































































































































































Search results

Summary of Contents for 0967B001 - XL H1 Camcorder

Reviews:

Brands by name

Popular brands

Canon 0967B001 - XL H1 Camcorder, Instruction Manual

Search results

Summary of Contents for 0967B001 - XL H1 Camcorder

Reviews:

Brands by name

Popular brands