The EdgeAccess Universal Chassis System
2361 Modem Users Manual
7-7
A modem can be manually switched from inactive to active for the following reasons:
1)
To bring the modem into standard use.
2)
To test with a full data payload for quality verification purposes.
3)
To track down an unknown, intermittent error, and determine if this modem is the source
of it.
Note: Switching from redundant mode to a non-redundant modem mode does not
require that you replace the redundant ELIMs. You can use redundant ELIMs for
normal modem operation (As long as the Auto-Switching redundancy mode is off).
Fiber Logic LIU
LIU Logic Fiber
Central Office
DTE
BER
GEN
BER
DET.
BER
DET.
BER
GEN
Figure 45. Link Self Test Running Continuously on an Auxiliary Channel at 48.25 kbps
Summary of Contents for EdgeAccess Universal Chassis System 2361 T1
Page 1: ...2361 T1 Modem User Manual...
