The EdgeAccess Universal Chassis System
2361 Modem Users Manual
4-14
Table 6 describes the function of each trap:
Table 6: Alarm Trap Option Definitions
Name
Function
1. All Traps
Enables or disables all the traps in this list
2 Inactive Link/Modem Traps
Loss of signal received from attached
equipment
3 Electrical AIS
"All 1's" signal pattern received from
attached equipment
4 Configuration
Incompatibility between local and remote
modem, or between main modem module
and the LIMs attached to it
5 Power Supply
Failure of power supply in the remote
chassis
6 Test
Failure of Bit Error Rate Test (BERT) or
failure in the continuous self-test operation
7 Link Self Test
Failure of fiber between Local and Remote
units
8 Power On Self Test
Failure of Power-On self test
9 Inactive Composite Link
In a redundant configuration, failure of the
redundant or inactive link .
4.4.7 Standalone Modem Alarm Input Settings
The standalone modem allows inputting of alarms from an external device, thus generating a trap,
(if the trap is enabled) when triggered. To enable this feature, do the following:
1. From the Main Menu, type "1" to open the System Configuration screen.
2. Type "3," Link Level Trap Configuration.
3. Look at option 8. If Alarm Input Trap is enabled; the feature is enabled.
4. If Alarm Input Trap is "disabled", type "8," then press the spacebar to "enable" the option.
Summary of Contents for EdgeAccess Universal Chassis System 2361 T1
Page 1: ...2361 T1 Modem User Manual...
