The EdgeAccess Universal Chassis System
2361 Modem Users Manual
4-3
When the switch position is TRM, the interface is a DCE, and the I/O assignments for the 9-pin
serial port EIA-232 interface (on the standalone modem) are:
Table 2 EIA-232 DE-9 Pin Out
Signal Name
Pin Number
Source
I/O
TXD 3
DTE
I
RXD 2
DCE
O
RTS 7
DTE
I
CTS 8
DCE
O
DTR 4
DTE
I
DSR 6
DCE
O
DCD 1 DCE
O
RI 9
DCE
O
S/G GND
5
____
----
Note the 9-pin serial port on the standalone modem can be configured as a DTE. This permits
connection to a serial port on a typical dial-up modem device.
For accessing the terminal screens through the DMM, please consult the DMM manual regarding
two important issues:
•
Accessing a specific modem's menu screens via the DMM
•
Viewing a specific modem within the UCS
Using the DMM screen, you must first access the Chassis that the modem resides in,
then access the slot number for the modem. You'll then see the same terminal screens
as if you had interfaced to the modem directly.
4.3 Main Menu
Once the correct chassis and slot number is accessed via the DMM or direct connection to the
modem, the modem's Main Menu screen will appear.
Figure 23. The Modem Main Menu Screen
Summary of Contents for EdgeAccess Universal Chassis System 2361 T1
Page 1: ...2361 T1 Modem User Manual...