17
137384
English
Scalpel - Owner’s Manual Supplement
the shift cable housing and brake line into
the desired head tube cable port, allowing
the cable to exit the frame.
a. Make sure the cables will not come into
contact with the fork steerer tube. Photo
taken at inside headtube showing cable
entrance, avoiding steerer tube.
CBRT-6
7. The final step is to secure all of the cables
in the downtube to the cable guide on the
bottom of the tool holder.
a. This is secure the cables within the frame
and prevent cable rattle.
b. Unbolt and remove the tool holder on the
down tube, exposing the hole underneath.
c. Thread a zip tie around the dropper cable
and rubber hose (which contains the shift
and brake housing) in the downtube.
CBRT-7c
CBRT-7c