19
137384
English
Scalpel - Owner’s Manual Supplement
Chain Guide Setup
1. To set up the chain guide:
a. Shift into the largest cog on the
cassette.
CNG-1
b. Align the chain guide so that it is
perpendicular (90 degrees) to the chain.
CNG-2
c. Torque the main pivot to 15Nm.
CNG-3
2. Hold the chain guide in place while
torquing.
d. The lower surface of the chain guide
should be 3mm above the chain.
Place a 3mm allen key flat on top of the
chain and lower the chain guide into the
allen key, then torque to spec.
CNG-4
