16
137384
English
Scalpel - Owner’s Manual Supplement
a. Tighten the cable funnel into place with
the funnel shifted all the way forward in
its adjustment slot.
b. Attach the rubber hose to the cable
funnel with a 5mm wide cable tie. Use
the cable tie to cinch the rubber tube
down onto the cable funnel. Slightly tug
on the rubber hose to make sure it is
secured to the funnel.
c. Side Notes:
i. The Cable Funnel Tubing and Tie is
un-shurnk shrink wrap tubing with a 16 x
650 mm diameter. If stock is unavailab-
le, you can use also use a light-weht road
bike tube cut and sized to fit.
CBRT-3
4. Keeping the rear triangle off the bike,
install both the shift housing and brake
hose, Install both the shift housing and
brake line into the tube in tube cable
ports on the inside of the chainstays.
a. Ensure the cable routes into the cable
funnel and rubber.
b. Once the cables have traveled most of
the way through the rubber hose, install
the rear triangle onto the front triangle
and assemble the main pivot.
d. Side Notes:
CBRT-4
5. When the main pivot is installed, make
sure the cable funnel does not make
contact with the front triangle.
a. Check to make sure that the water bottle
fixing bolt does not contact the rear
triangle. (CBRT-5) The water bottle fixing
bolt is a button head M5 x 0.8 x 20mm.
CBRT-5
6. Once the main pivot is installed, route
