Cannon CT-500, Instruction & Operation Manual

Page: 24 / 49

16 CT-500 Instruction Manual
Rear Panel Connections
• Control Thermistor — Connects main temperature control thermistor to the Control Unit
• Float Switch — Connects the fluid-level sensor to the Control Unit
• Over-temp. Thermistor — Connects over-temperature thermistor to the Control Unit
• Heaters
— Supplies AC Mains power to the bath heaters
• Stirrer — Supplies AC Mains power to the motor-stirrer
• Fuses
— Protects against damage or hazard in the event of an internal fault
• MAINS
— Provides AC MAIN power entry connection
Caution:
The CT-500 power cord must be connected to an AC MAINS source
matching the specifications o the S/N label on the instrument rear panel.
Figure 14: CT-500 Rear Connections