manualshive.com logo in svg

C&K systems Sierra S5030, Technical Manual

Share
Download
C&K systems Sierra S5030 Technical Manual Download Page 33

4

29

Disarm/Alarms

Automatic (Timed)
Disarming

Interior armed  _X_

Perimeter armed  _X_

Exit allowed  _X_

Requires user code  _X_

Automatically arms  _X_

No entry allowed ___

Your system can automatically
disarm itself at preset times of
the day. This option must be
programmed into your system
by your installer.

You can change the days that
Automatic Disarming occurs by
following the procedure to the
right.  To stop Automatic Dis-
arming, turn off all of the Auto-
matic Disarming Days.  To
change the times that Auto-
matic Disarming occurs, con-
tact your installer.  (See Note 1
on page 62.)

To Change Automatic-

Disarming Days:

1.

Press and hold the 

[walk test]  key for 2 seconds

until you hear two beeps.

Enter the master user code.

2.

Press the 

 key  seven

times  until you see the fol-

lowing:

1 2 3 4

 5

 6 7 8

3.

Press the 

 key.  The

zone LEDs light to indicate

when Automatic Disarming

occurs. The zone 1 LED rep-

resents Sunday, etc. A lit

LED means disarming occurs

on that day.

4.

Press the number of the

day(s) you wish to switch on

or off. To exit, press the

 key.

Technical Manuals Online! - http://www.tech-man.com

Summary of Contents for Sierra S5030





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands