Candela AlexTriVantage, Operator'S Manual

Page: 9 / 116

8501-00-1800, Revision 05 Confidential ix
Candela Corporation AlexTriVantage Laser System
Label Description
Label 6: Indicates laser emission characteristics and
classification per the IEC/EN standards.
Label 7: Indicates U.S. patents that may be covered on this
laser system.
Label 8: Indicates that selected requirements under CDRH 21
CFR 1040.10 & 1040.11 were waived for comparable IEC
requirements as allowed by Laser Notice 50.
Label 9: This label indicates that a tip hazard may exist while
transporting the laser system. To avoid a tip hazard, move the
laser at a normal to slow pace, do not make sudden turns, and
use caution when traversing the system across slopes or
ramps.
O
Label 10: Main Power Switch - OFF position.
|
Label 10: Main Power Switch - ON position.
Label 11 : Remote interlock circuit for door switch. Indicates the
location of the remote interlock circuit that can be connected to
a door switch to shut down the laser if the door is opened
during laser emission. The symbol illustrates that an open
connection will inhibit the lasing function.
Label 12: Warning - Main Power Switch. This label draws
attention to the main power switch. The switch should be
placed in the OFF position when the system is not being used.
When the system is being used, the switch should be placed in
the ON position.
Label 13: IEC Type B Applied Part symbol. Provides delivery
system information. The icon of a man indicates that the
delivery system is equipped with a “Type B” applied part.
Label 14: Waste Electrical and Electronic Equipment symbol.
Indicates that the AlexTriVantage laser system and its
components cannot be disposed of as regular trash. Contact
Candela for disposal information.