Candela AlexTriVantage, Operator'S Manual

Page: 54 / 116

2-24 Confidential 8501-00-1800, Revision 05
Candela Corporation AlexTriVantage Laser System
Table 2-2: Standby/Ready Button Functions
Button Description
Ready
Select the Ready button (the upper left button with the dot in the
center) to put the system into the Ready state. In Ready state the
laser is armed and ready to use for treatment. When the system
enters the Ready state, the Ready button displays in green and the
Ready Indicator on the front panel and the Delivery System Cable
Indicator are illuminated.
Select the Ready button to begin treatment after all of the following
events have occurred:
The Handpiece has been calibrated, if needed.
The Handpiece has been removed from the Calibration
Port.
The Distance Gauge has been installed.
NOTE: If the laser remains idle (unused) for more than two minutes
in the Ready state, it will automatically revert back to the Standby
state.
Standby Select the Standby button (the lower right button) to place the
system in Standby. The laser is disabled when the system is in
Standby. When you select Standby, the Standby button displays in
yellow.
The system automatically reverts to Standby when the laser
remains idle in the Ready state for more than 2 minutes.
Select to Standby button when a treatment session is complete,
before you remove the Distance Gauge and return the Handpiece
to the Calibration Port.
Caution: Do not enter the Ready state without a fiber
installed and having the proper protective eyewear on.