Canbuilt OPT-5405, Manual

Page: 12 / 22

4"
0"
4"
4" 4"
4"
0"
4"
4" 4"
4"
0"
4"
4" 4"
Aiming Procedures
INSPECTION LIMITS FOR HIGH BEAM HEADLAMPS AND AUXILIARY DRIVING LIGHTS
The inspection limits for high-beam headlamps shall be with
the center of the high-intensity zone from 100mm (4") up, to
100mm (4") down; and, from 100mm (4") left to 100mm (4")
right on a screen at 7.6m (25').
Inspection limits (shaded area) for the center of the high-
intensity zone of
HIGH BEAM headlamps and auxiliary driving
lamps.
The correct aim for fog lamps with symmetrical beams (as
described in SAE J583) is with the top edge of the high-intensity
zone at or below the horizontal centerline and the center of the
high-intensity zone centered on the screen.
The figure shows (shaded area indicates high-intensity zone) a
properly aimed symmetrical
FOG LAMP BEAM on the aiming
screen.
The inspection limits for symmetrical fog lamps installed with
universal mounting applications, shall be with the top edge of
the high-intensity zone at horizontal or below and with the
center of the high-intensity zone from 100 mm (4") left to
100mm (4") right on a viewing screen located at 7.6m (25') from
the vehicle.
Inspection limits (shaded area) for the top edge and
center of the high-intensity zone of
FOG LAMPS .
INSPECTION LIMITS FOR FOG LAMPS
Page 11 - Aiming Procedures
Canbuilt Mfg.
Perfect Night Vision.....